BK Precision 4060B Series Скачать руководство пользователя

Страница: 28 / 28

Service Information

Warranty Service

Please go to the support and service section on our website at bkprecision.com to obtain an RMA #. Return the product

in the original packaging with proof of purchase to the address below. Clearly state on the RMA the performance problem

and return any leads, probes, connectors and accessories that you are using with the device.

Non-Warranty Service

Please go to the support and service section on our website at bkprecision.com to obtain an RMA #. Return the product

in the original packaging to the address below. Clearly state on the RMA the performance problem and return any leads,

probes, connectors and accessories that you are using with the device. Customers not on an open account must include

payment in the form of a money order or credit card. For the most current repair charges please refer to the service and

support section on our website.

Return all merchandise to B&K Precision Corp. with prepaid shipping. The flat-rate repair charge for Non-Warranty

Service does not include return shipping. Return shipping to locations in North America is included for Warranty Service.

For overnight shipments and non-North American shipping fees please contact B&K Precision Corp.

B&K Precision Corp.

22820 Savi Ranch Parkway

Yorba Linda, CA 92887

http://bkprecision.com

714-921-9095

Include with the returned instrument your complete return shipping address, contact name, phone number and description

of problem.

Version: November 10, 2020

Содержание 4060B Series





























Результаты поиска

Содержание 4060B Series

Отзывы:

Похожие инструкции для 4060B Series

Бренды по названию

Популярные бренды

BK Precision 4060B Series, Руководство по программированию

Результаты поиска

Содержание 4060B Series

Отзывы:

Похожие инструкции для 4060B Series

Бренды по названию

Популярные бренды