BK Precision 4060B Series, Руководство по программированию

Страница: 17 / 28

Common Command Introduction 17
Query Format <channel>:BursTWaVe? <parameter>
<channel>={C1, C2}
<parameter>=<period>
……
Query Response
<channel>:BTWV <type>,<state>,<period>
……
Example Set channel one burst period to 1S.
C1:BTWV PRD, 1
Set channel one burst delay to 1s C1:BTWV DLAY, 1 Set channel one burst to infinite C1:BTWV
TIME, INF
Read channel two burst parameters of which STATE is ON.
C2:BTWV?
Return:
C2:BTWV STATE,ON,PRD,0.01S,STPS,0,TRSR,INT,
TRMD,OFF,TIME,1,DLAY,2.4e-07S,GATE_NCYC,NCYC,
CARR,WVTP,SINE,FRQ,1000HZ,AMP,4V,OFST,0V,PHSE,0
Read channel two burst parameters of which STATE is OFF.
C2:BTWV?
Return:
C2:BTWV STATE, OFF
2.17 Parameter Copy Command
Description Copies parameters from one channel to another.
Command Syntax ParaCoPy <destination channel>, <src channel>
<destination channel>={C1, C2}
<src channel>={C1, C2}
Note: the parameters C1 and C2 must be set to the device together.
Example Copy parameters from channel one to channel two.
PACP C2, C1
Related Commands ARWV, BTWV, MDWV, SWWV, BSWV
2.18 Arbitrary Wave Command
Description Sets and gets arbitrary wave type.
Command Syntax <channel> ARWV(ArbWaVe) INDEX,<value1>, NAME,<value2>
<channel>={C1, C2}
<value1>: the table below shows what the index number mean.)
< value2>: see table below.
Query Format <channel>:ARbWaVe?
<channel>={C1, C2}
Query Response <channel>:ARWV <index>
Example Set StairUp arbitrary wave output by index.
C1:ARWV INDEX, 2
Read system current wave.
ARWV?
Return:
ARWV INDEX,2,NAME,StairUp