BK Medical bkSpecto, Руководство для продвинутых пользователей

Страница: 98 / 164

98 Chapter 9 August 2018 bkSpecto Advanced User Guide (16-01642-01)
Bodymarks
Figure 9-4. Bodymark selector.
To place a bodymark on the image:
1
Tap the Label button.
2
Tap the Bodymarks button. From the drop-down menu, select the relevant
application. The displayed bodymarks will reflect the selected application.
3
Select the bodymark you want. (If you don’t see the one you want, swipe the
input region to see more bodymarks.) The bodymark appears on the monitor
with a highlightedimaging plane indicator.
4
Drag the imaging plane indicator to position it; and use the directional buttons
to rotate it.
To move a bodymark:
1
Tap the Move button. A green frame appears around the bodymark.
2
Drag it to the position you want, and tap again.
To replace a bodymark:
To replace an existing bodymark with a different one, tap the new bodymark.
To remove a bodymark from the monitor:
•
Tap the Delete button.
Unless you delete it or replace it with a new one, a bodymark will remain on the
monitor until you change Preset or begin to image a new patient.
Adjusting the Imaging Plane Indicator
To adjust the imaging plane indicator:
When you place a bodymark on the image, the imaging plane indicator is green and
can be adjusted as follows:
1
Drag the imaging plan indicator with the trackpad.
2
Rotate left or right by pressing or buttons.
3
Tap again when the imaging plane indicator is the way you want it.
The imaging plane indicator turns orange and can no longer be adjusted.