BK Medical bkSpecto, Руководство для продвинутых пользователей

Страница: 43 / 164

bkSpecto Advanced User Guide (16-01642-01) Working with the Image 43
Freeze the image and slide the Cine bar to scroll backward or forward through the
series.
Images are constantly being saved and stored for review. When storage capacity is
reached, the oldest images are discarded as new ones are stored. The number of
images that can be stored for review varies, depending on such factors as image
resolution and size.
Images in a clip must be comparable. Therefore, changing certain parameters that
affect the image will cause already-stored images to be discarded. If this happens,
there will not be a full set of images to be reviewed until the storage has had time to
fill again.
You can change some of the settings for the Cine function.
Using Cine
To use the Cine function:
•
Freeze the image, and slide the cine bar to scroll through the frames.
Cine frame numbers appear on the bottom center of the monitor.
Figure 4-6. Cine frame numbers, indicating that frame no. 133 of 448 is being displayed.
Cine Trim
You can set start and stop markers to indicate the range of images to be displayed in
Cine Play .
•
Freeze the image and scroll back through the frames using the cine bar.
•
Select where you want the start marker and tap Cine Trim Start .
•
Select where you want the stop marker and tap Cine Trim End .
•
Tap Cine Play to see your selected frames.
The current frame and the total number of frames are displayed on the monitor. The
start and end frame numbers are displayed on the touchscreen Cine buttons. After the
newest image has been displayed,
Cine Play will begin to play the loop again.
Figure 4-7. Touchscreen buttons for trimming cine.
Using Cine in Doppler Mode
When cine is activated while imaging in Doppler mode, a vertical cine cursor is
displayed overlaying the Doppler image.