BJM Pumps FAHRENHEIT SK-F Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 60 / 64

START-UP REPORT FORM
START-UP REPORT FORM
This form is designed to record the initial installation, and to serve as a guide for troubleshooting at a
later date (if needed).
Industrial Flow Solutions Operating, LLC
104 John W Murphy Drive
New Haven, CT 06513, USA
Pump Owner’s Name
Location of Installation Date of Installation:
Dealer Dealer Phone ( )
Date of Purchase
Model Serial No
Voltage Phase Hertz HP
Does impeller turn freely by hand? Yes No
Condition of Equipment New Good Fair Poor
Condition of Cable Jacket New Good Fair Poor
Rotation: Direction of Impeller Rotation (viewed from bottom)
(Use C/W for clockwise, CC/W for counterclockwise):
Resistance of cable and Pump Motor (measured at pump control)
Red-Black ohms Red-White ohms White-Black ohms
Resistance of ground circuit between control panel and outside of pumps
Ohms
MEG
OHM CHECK OF INSULATION
Red to ground White to ground Black to ground
Condition of location at start-up Dry Wet Muddy
Was equipment stored
If YES, length of storage:
Yes No.
Liquid being pump
Debris in bottom of station? Yes No