BJ-241
Participation box
User guide
This device provides switch control of any electrical
appliance.
Fig.1: Participation box
To use the Participation Box you must follow the next
steps:
1.
Plug the participation box into the wall
socket, having in mind the technical
specifications of the equipment.
2.
Connect the device you have chosen to
participation box socket (fig.1), having in
mind the technical specifications of the
equipment and being sure it is in operating
condition.
3.
Situate the function selector (fig.1) in the
desired position according to the desired
action (table 1).
4.
Connect a switch to the “switch input”
(fig.1) and activate it.
5.
If you want, now you can control a switch
adapted device while you activate the
appliance connected to the Participation
Box.
The switch output will work at the same time
and in the same way as the appliance connected
to the Participation Box. Connect the device to
the “switch output” (fig.1) with the included
cable and activate it.
Table 1
Function
selector
position
Operating mode
0
If the Participation Box was on
it goes off and vice versa
1
During
the
click
the
Participation Box is on
2
Timed 1s
3
Timed 2s
4
Timed 5s
5
Timed 10s
6
Timed 15s
7
Timed 30s
8
Timed 45s
9
Timed 60s
A
Timed 1min 30s
B
Timed 2min
C
Timed 2min 30s
D
Timed 3min
E
Timed 4min
F
Timed 5min
Function selector
wall socket
participation box socket
switch input
switch output
Power Supply
230~ / 50Hz
Maximum power supply
250V~
Dimensions
105x59x50 mm
2 x switch 3.5 mm mono jack plug
Maximum load:
Resistive loads: 2000W/9A (cos
=1)
Motor loads: 1000W/5,5A (cos
=0,8)
Halogen lamps with transformer: 300W/1,7A
(cos
=0,76)
Maximum switch output charge: 24V – 1A
1. Description of the device
2. Technical data
3. Operating instructions
