BJ Live BJ CONTROL PRO, Руководство пользователя

Страница: 5 / 24

BJ-256 BJ Control Pro
User Guide
BJ-256 BJ Control Pro
Page 5
Figure 3. Removing the cover
To reattach the cover, first insert one of the tabs in the position shown in Figure 4.
Then flex the cover slightly and insert the tab on the opposite side.
Figure 4. Attaching the cover
IMPORTANT: DO NOT use too much force to bend the cover as it could
break down.
2. Basic operation
The remote control can be operated directly by pressing the keys on its keypad
("direct control") or by using a switch and the scanning selection option
("sequential control").
2.1 Enabling a cell for direct control
The steps for enabling a key with the "direct control" functionality are as follows
:
1.
Check that the battery is charged. To do this, check that the LED indicating
the battery status (see Figure 2) is
not flashing .
If the battery status LED is flashing red, you need to charge the battery by
connecting the charger supplied with the remote control to a USB port on a
computer. When the battery LED turns green, this means that the battery is
charged and you can continue to step 2 after you have disconnected the
charger.
2.
Follow the instructions in section 3 of this manual to programme the key on
the remote that you want to use (e.g. key 5).
3.
Prepare the device that you wish to control according to its instructions.
1.
2.
!