Ver. 1.00
- 23 -
SRP-S320
1-10 Removing Paper Jam
1) When a paper jam occurs, turn the printer OFF and then back ON, open the cover,
and remove the jammed paper.
※
In case of a minor jam, it may be possible that the operating blade returns to the
original position and cover can be opened simply by turning the printer OFF and
then back ON.
Follow the steps shown below if the cover does not open after power cycling.
2) Turn the printer OFF.
3) Lift the paper rollout part of the COVER-CUTTER to remove it.
4) Turn the knob and insert the blade that sticks out using a cross-head screwdriver as
shown below.
5) Lift the cover-open lever and remove the jammed paper. Put the COVER-CUTTER back in
place.
6) Turn the printer ON and use it.
