1-7-2 Mounting Partition(40,58,62mm)
Position the partition on the front and back grooves and press the center part to fix it as
shown in the picture.
The position to secure the partition varies depending on the type of paper.
(Refer to the picture below.)
1. 58mm (2”) roll paper: mount 1 partition at Position #1.
2. 40mm roll paper: mount 2 partitions at Positions #1 and #2.
3. 62mm roll paper: mount 1 partition at Position #2.
※
The shape of the partition is the same for each type of roll paper.
※
Caution
After using narrower papers (e.g. 40, 58, 62mm width) than the maximum paper width of
80mm, please do not use any wider ones as it might affect printing quality due to uneven
platen roller abrasion.
Position #1
Position #2
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
