SRP-330II/332II
Rev. 1.00
BIXOLON
- 29 -
ESC D
Function:
Set horizontal tab position
Code:
ASCII
ESC
D
n1...nk
NUL
Hex
1B
44
n1...nk
00
Decimal
27
68
n1...nk
0
Range:
1
≤ n ≤ 255 , 0 ≤ k ≤ 32
Default:
n = 8, 16, 24, 32, 40,....., 232, 240, 248
Description:
■
This command sets the horizontal tab position.
•
n defines the number of columns from the beginning of the line to the horizontal tab setting.
•
k denotes the number of horizontal tab positions to be set.
•
The horizontal tab position is stored as a value of [character width x n] measured form the beginning of the line.
Remarks:
■
The data [n]k signifying the set position is transmitted in the ascending order and ends with a NUL code.
■
ESC D NUL cancels all horizontal tab positions.
■
Tab position is set at the value of [character width x n] from the beginning of the line.
■
The character width includes the space to the right of the character, and it will be twice the normal character when the
double width characters are selected.
■
If the data [n]k is equal to or smaller than the preceding data [n]k-1, the horizontal tab setting has been completed.
■
Up to 32 horizontal tabs can be set, the data exceeding this limit is processed as normal ones.
■
Even if the character width is changed after setting the horizontal tab positions, the horizontal tab positions remain
unchanged.
Differences:
None
