Bittium Respiro Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 48

Bittium Respiro Скачать руководство пользователя страница 34

Respiro

34 (48)

Operating Instructions

© Bittium Biosignals 2022

•

IT infrastructure shall be designed in a controlled manner with Bittium Bi-

osignals Ltd. Changes to the IT-network could introduce interruption in the

data analysis.

•

Connection of the system to an IT-network that includes other equipment

could result in previously unidentified risks to patients, operators or third

parties. The responsible organization should identify, analyze, evaluate and

control these risks.

o

Subsequent changes to the IT-network could introduce new risks and

require additional analysis.

o

Changes to the IT-network include: changes in the IT network configu-

ration, connection of additional items to the IT-network, disconnecting

items from the IT-network, update of equipment connected to the IT-

network, upgrade of equipment connected to the IT-network.

3.4

Battery replacement

Respiro device battery is an in-built part of the device and can be changed only by
Bittium Biosignals Ltd. Battery lifetime depends on device usage modes and
recharging cycles. It is recommended to replace the battery after max. 2 years.

When battery replacement is needed, please contact your local distributor or
Bittium Biosignals Ltd for battery replacement.

3.5

User responsibility and warranty

This product shall be assembled, operated, maintained, and repaired in accord-
ance with the instructions provided.

A defective product must not be used. Parts that are broken, worn, missing, in-
complete, distorted or contaminated must be replaced immediately. Should any
repair or replacement become necessary, we recommend that the device is deliv-
ered to your local distributor or Bittium Biosignals Ltd for service.

«
...
32
33
34
35
36
...
»

Содержание Respiro

















































Отзывы:

Нет отзывов