C
op
yr
ig
ht © 2
0
2
1-
0
9-
0
7 B
it
ti
um
. A
ll r
ig
ht
s r
es
er
ve
d. D
oc
um
en
t n
um
be
r: 5
8
0
0
6
4
6A
0
2
Bittium
OmegaSnap™
2-CH ECG Electrode
Bittium Biosignals Oy
Pioneerinkatu 6
70800 Kuopio, FINLAND
Bittium OmegaSnap™
2-CH ECG Electrode
Quick Guide
The Bittium OmegaSnap™ 2-CH ECG Electrode is intended to be used
with the Bittium Faros™ 360 ECG device for the purpose of measuring
cardiac signals (ECG).
Bittium
Faros™
360
Bittium
OmegaSnap™
Multi-CH
Adapter
Bittium
OmegaSnap™
2-CH ECG
Electrode
Equipment
Tel: +358 (0)40 3442000
email: [email protected] or
www.bittium.com
Caution!
›
Place the electrode onto intact, clean
skin only.
›
Do not use body lotion or creams in
the electrode area prior to applying the
electrode.
›
Do not use outdated electrodes. Please
check the date on the packing material.
›
The electrode is for single use only.
Reuse of the product may cause con-
tamination, leading to infections.
›
Stop using the Faros ECG device and
remove the OmegaSnap electrode
from the skin if the electrode causes
adverse reactions such as skin irritation
or rash. If any problems occur, please
contact your clinic or person responsi-
ble for treatment.
Quick Guide
- Bittium OmegaSnap
™
2-CH ECG Electrode
›
Replace the electrode if it does not
stick to the skin.
›
Remove the electrode from the skin
after measuring.
›
Use the electrode only with the Bittium
Faros™ ECG device
›
The Faros device and OmegaSnap
adapter must be cleaned between
users. The recommended cleaning
method: non-alcoholic cleaning and
disinfection wipes for medical devices,
for example mikrozid® sensitive wipes
or SaniCloth AF3 wipes.
›
Follow these instructions. See more
detailed instructions in the Faros
manual.
