Bitspower BP-VG3090TIGXH, Инструкция по эксплуатации

Страница: 3 / 9

[ 3 ]
Notice
Before filling in the water, please make sure all the components are installed correctly. To prevent any leakage
which may damage the PC components, please perform a 24-hour leaking test with only the pump connected
to the power supply.
Bitspower reserves the right to change the product design and interpretations. These are subject to change
without notice. Product colors and accessories are based on the actual product.
When using leak tester on water cooling loop, in order to avoid product damage due to excessive pressure, the
input pressure should not exceed 0.5kg/cm
2 (Bar). If the product is damaged due to
excessive pressure, it will be borne by the customer. Forbidden to use the leak teser when there is water in the
loop or the pump is runing.
Bitspower recommends that consumers use the Bitspower Pellucid Coolant for their water-cooling liquid.
Also, they can add Bitspower Dye to Pellucid Coolant for the color requirement. If the consumer chooses
different water-cooling liquids, the resulting impurities may cause peeling off the coating on some of the
hardware, water channels blockage by built-up residue, improper operation of the water pump, water tank
tube breakage, and o-rings deformation leading to leakage. Any issues related to the use of inappropriate
water-cooling liquid will be the responsibility of the consumer.