manualshive.com logo in svg

BitFlow NEO-PCE-CLB, Справочник по аппаратуре, Страница: 108 / 300

Поделиться
Скачать
BitFlow NEO-PCE-CLB Скачать руководство пользователя страница 108

CON1 Register

The Neon

NEO-8-10

BitFlow, Inc.

Version G.5

VCNT_LD

R/W, CON1[8..6], Alta, Karbon-CL, Karbon-CXP, Neon, R64

This registers controls how the Vertical CTAB counter (VCOUNT) is loaded with the 
8000h value. 

VCNT_RLS_STK

R/W, CON1[11..9], Alta, Karbon-CL, Karbon-CXP, Neon, R64

This register controls the stick/release of the VCOUNT to/from address 7ff0h. 

ABORT_CON

R/W, CON1[14..12], Alta, Karbon-CL, Karbon-CXP, Neon, R64

This register controls the ABORT operation of the Acquisition State Machine. 

NO_VB_WAIT

R/W, CON1[15], Alta, Karbon-CL, Karbon-CXP, Neon, R64

This bit has the following properties.

VCNT_LD

Meaning

0 (000b)

No load operation performed. 

1 (001b)

VCOUNT is loaded at the assertion of FEN qualified 
with the ENVLOAD column in the VCTAB.

2 (010b)

VCOUNT is loaded at the assertion of FEN.

3 (011b)

VCOUNT is loaded at the assertion of trigger. 

VCNT_RLS_STK

Meaning

0

VCOUNT does not stick at 7FF0h. 

1

VCOUNT sticks at 7FF0h. It will be released from that 
address by a LOAD or RESET operation.

ABORT_CON

Meaning

0

Acquisition will be aborted by a host command. 

1

Acquisition will be aborted by de-assertion of trigger 
of by a host ABORT command.

NO_VB_WAIT

Meaning

0

Wait for the Vertical Active Window before executing 
the Head Tag Quad. 

1

Do not wait for the Vertical Active Window for exe-
cuting the Head Tag Quad.

Содержание NEO-PCE-CLB













































































































































































































































































































Отзывы:

Нет отзывов