1
Data streams as Open Sound Control (OSC) messages
to
IP address 192.168.1.100 through port 8888
.
Start
Here
BITalino R-IoT is pre-programmed
to connect to a network called "riot".
3
Have
Fun!
2
When the device is
turned on
, a
red LED is lit
Then, it
turnsgreen and blinks
while it tries to
find
the Wi-Fi network
. When it connects to that network,
the
LED turns blue and stays on
.
Connect
Battery
Plug the battery onto the socket
found on the R-IoT block.
4
This will enable you to configure your BITalino R-IoT
for data acquisition on OpenSignals.
Launch
OpenSignals
Press to configure your device.
5
Enable Device
Press the button
to manually add a device.
0
FOUND
192.168.1.100:8888
1. Set the computer's IP to static to match
the one that R-IoT expect to find:
192.168.1.100
.
2. On the text box type
192.168.1.100:8888
and then press enter.
6
Have Fun!
Press (record).
After stopping your recording, data can be saved
through the button; please refer to the
OpenSignals manual to learn all about its features.
Quickstart Guide
-
At this point the BITalino R-IoT
is already streaming data
over UDP and ready to use.
One of the tools you can use to acquire data
from the BITalino R-IoT is
OpenSignals
,
(as described in the next steps),
but any OSC-compatible software will work.
You should now be able to see the data stream
coming from the device
Quickstart Guide
©PLUX wireless biosignals 2019 | BITalino R-IoT MN Quick Start Guide 1.0.0 | 2019.09
Have any questions? Visit:
www.bitalino.com for software and documentation
forum.bitalino.com to share your thoughts and projects
[email protected] to talk with our team
DISCLAIMER
BITalino is not a medical device nor is it intended for medical diagnosis; it is provided to you "as is" and we make no
express or implied warranties whatsoever with respect to its functionality, operability, or use, including, without limitation, any
implied warranties, fitness for a particular purpose, or infringement. We expressly disclaim any liability whatsoever for any direct,
indirect, consequential, incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from
business interruption or loss of data, regardless of the form of action or legal theory under which the liability may be asserted, even
if advised of the possibility of such damages.
By default BITalino R-IoT is configured to connect to a computer with the fixed IP address 192.168.1.100
on port 8888 over a network with SSID named "riot". These settings can be changed as shown
on the back of this guide. See the Connect to another network section.
