BT-410F and BT-410A Operation manual
P/N:410-ENG-OPM-EUR-R12
Bistos Co.,Ltd.
2021,05
14
commercial
or
hospital
environment.
Voltage dips, short
interruptions and
voltage variations
on power supply
input lines
IEC 61000-4-11
0 % UT for 0.5 cycle
At 0˚, 45˚, 90˚, 135˚,
180˚, 225˚, 270˚, 315˚
0% UT for 1 cycle
At 0˚, 180˚
50 Hz :
70 % UT for 25 cycles
At 0˚, 180˚
50 Hz :
0 % UT for 250 cycles
At 0˚, 180˚
0 % UT for 0.5 cycle
At 0˚, 45˚, 90˚, 135˚,
180˚, 225˚, 270˚, 315˚
0% UT for 1 cycle
At 0˚, 180˚
50 Hz :
70 % UT for 25 cycles
At 0˚, 180˚
50 Hz :
0 % UT for 250 cycles
At 0˚, 180˚
Mains power quality should
be that of a typical
commercial or hospital
environment. If the user
requires continued
operation during power
mains interruptions, it is
recommended that the BT-
410F and BT-410A be
powered from
uninterruptable power
source, battery.
Power frequency
(50Hz)
magnetic field
IEC61000-4-8
30 A/m, 50Hz
30 A/m, 50Hz
Power frequency magnetic
fields should be at levels
characteristic of a typical
commercial or hospital
environment.
Conducted RF
IEC61000-4-6
3 Vrms
150 kHz to 80 MHz
6 Vrms in ISM bands
between 0.15 MHz
and 80 MHz
3 Vrms
150 kHz to 80 MHz
6 Vrms in ISM bands
between 0.15 MHz
and 80 MHz
Portable and mobile RF
communications equipment
should be used no closer to
any part of the electric breast
pump, including cables, than
the recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance:
d = 1.2
P
d = 1.2
P
80 MHz ~ 800
MHz
d = 2.3
P
800 MHz ~ 2.7
MHz
where P is the maximum
output power rating of the
transmitter (W) according to
the transmitter manufacturer
and d is the recommended
separation distance in
meters(m).
Field strengths from fixed RF
transmitters, as determined
by an electromagnetic site
survey
a
, should be less than
the compliance level in each
frequency range
b
.
Interference may occur in the
Radiated RF
IEC61000-4-3
3 V/m
80 MHz to 2.7 GHz
80% AM
3 V/m
80 MHz to 2.7 GHz
80% AM
