First, turn the power switch
to the
OFF
position. Press on
the two circles of the battery
cover and slide the cover
towards you and insert the
battery.
Install the battery in the
compartment, ensuring the
+/- terminals of the battery
match the +/- indicators in
the battery compartment.
1.
Install the edge cleaning
brush by pushing directly in
to the holder.
2.
Turn
ON
the power switch
and charge the battery
directly from the power cord
for 4-5 hours prior to first
operation.
Note : initial charge will take 4-5 hours.
3.
Use the invisible wall
to keep the robot from
cleaning in areas where
obstructions have not
been removed. See the
User’s guide for detailed
operation instructions.
Assembly Instructions
Battery Installation
Getting Ready to Clean
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
SMARTCLEAN
TM
ROBOTIC VACUUM
QUICK START GUIDE
1974 SERIES
161-0108 Rev 06/16
PARTS INCLUDED
1.
2.
3.
4.
5.
7.
8.
1. BISSELL SmartClean® Robotic Vacuum
2. Rechargeble Li-Ion Battery
3. Dust Bin
4. Edge Cleaning Brushes
5. Programmable Docking Staton
6. Power Adapter
7. Invisible Wall
(4 AA batteries not included)
8. Filter
(Located inside Dust Bin)
NOTE:
Not all accessories come with every model. Be sure to check the carton for additional tools.
6.
** DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK.
(Located inside Dust Bin)
Power Switch
Power Switch
