8
4. Set the tank down and rotate the handle forward to
unlatch the lid. Lift off and set the lid aside.
5. Find the mouth of the bladder and fill to the bottom of the
neck with
hot
tap water.
NOTE: Fill the Bladder with water only.
6. Replace the tank lid m atching the lid and tank edges.
Handle m ust be in forward position to reinstall.
7. Rotate the handle to the carrying position to re-latch
the lid.
8. Replace tank in m achine base, seating firm ly in place.
9. Rotate handle back down to the latched position.
When it’s time to empty the Tank-in-Tank
™
10. Rem ove the Tank-in-Tank
™
– follow steps
1
and
2
on page 7.
11. Carry the Tank-in-Tank,
™
like a bucket, to the sink where
you will dispose of the dirty water.
12. Place in or at edge of sink, turn the Tank Drain Cap and
rem ove to release the dirty water.
13. Replace Drain Cap.
14. Refill with clean tap water as
above, steps
5
through
9
,
and refill the Sm artMix
®
Bottle
with BISSELL Cleansing Form ula,
™
as necessary.
15. If the cleaning job is com plete, rinse out the Tank-in-Tank
™
by rinsing clean water between the bladder and tank.
16. Replace the Tank Drain Cap and return the Tank-in-Tank
™
to the m achine, following steps
6
through
9
above.
17. Refer to the
Putting it Away
section
,
page 14, for the
final cleanup.
Rotate Handle
to Unlatc h
Fill Bladder only with
c lean tap water.
Latc hed
Tank Drain Cap
The Basics - continued
