perfect
SWEEP
™
Lay four handle sections out in a line with
the handle grip at the top and the threaded
hole at the bottom.
Fit smaller tapered end of section into larger
end of the next one and push together for
a snug fit.
With pieces assembled, strike down on
a hard surface to firmly lock sections
together. (Use a book or magazine to
protect your floor).
Lift the bail (threaded metal bar on the
top of sweeper) to vertical position. Screw
sweeper handle all the way down to the
“shoulder” of the threaded metal bail. Failure
to do this could cause the bail to break.
Snap brush comb on handle.
To learn more about this product visit:
www.bissell.com or call us at: 1.800.237.7691
CORDLESS SWEEPER
Quick and Easy Assembly
1
2
3
4
5
Part # 010-3803