1
P A R T S L I S T
Item
Qty
Description
Item
Qty
Description
A
2
Cart Side
H
4
5/16” Hex Nut
B
5
Horizontal Bars (packaged separately)
I
4
5/16” Lock Washer
C
4
Caster
J
10
1/2” Button Head Cap Screw
D
1
Brace
K
1
5/16” Hex Bit
E
2
Brace Bracket
L
4
Bungee Cord Hook
F
2
5/16” X 1” Carriage Bolt
M
1
Bungee Cord Stock
G
2
5/16” X 1 1/2” Hex Bolt
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
Read all instructions before proceeding.
—— Instruction Manual ——
VB95
Multi Court Volleyball Storage System
Date: 3/12/2018 Rev: 1 B.A. N.J.C. File: \pub\vb95inst Ref#: 960432
Customer Service
(800) 247-7668
1. Assemble
Cart Sides
(A) to
Horizontal Bars
(B) using the
5/16” Hex Bit
(K) and
1/2” Button Head Cap Screws
(J). See Figure 1.
2. Install
Brace Brackets
(E) to
Brace
(D) with
5/16” X 1 1/2” Hex Bolts
(G),
5/16” Lock Washers
(I)
and
5/16” Hex Nuts
(H). Leave hardware finger tight at this time. See Figure 1.
3.
Attach Brace assembly to
Cart Sides
(A) with
5/16” X 1” Carriage Bolts
(F),
5/16” Lock Washers
(I) and
5/16” Hex Nuts
(H). Tighten all hardware. See Figure 1.
4. Install
Casters
(C) into the bottom of
Cart Sides
(A). See Figure 1.
5.
Load all of your post padding on the top rack of the storage system. Knot one end of
Bungee Cord
Stock
(M), slide one
Bungee Cord Hook
(L) tight to knot. Attach
Bungee Cord Hook
(L) to one end
of
Cart Side
(A). Drape bungee assembly over post padding to the other side of
Cart Side
(A) just
enough to take the slack out and cut to length. Slide
Bungee Cord Hook
(L) onto
Bungee Cord Stock
(M) and knot to complete assembly.
NOTICE!
Do not over stretch
Bungee Cord Stock
(M),
damage to post padding could occur. Repeat process on the other end of storage system.
See Figure 1.
