1
P A R T S L I S T
**Packaged Separately
Item
Qty
Description
Item
Qty
Description
A
1
60" Backboard**
E
1
5/8" X 13" Hex Bolt
B
1
Extension Arm**
F
2
5/8" Lock Nut
C
2
Parallel Linkage**
G
2
Top Spacer Bushing
D
1
5/8" X 11" Hex Bolt
H
2
Bottom Spacer Bushing
Inspect all contents prior to installation. Report any missing parts to dealer immediately
.
Read all instructions before proceeding.
—— Instruction Manual ——
HT6060HDWR
Hardware to install 60" Backboard on 6" HangTime Pole System
Date: 01/15/18 Rev: I.R. B.A. N.J.C. File: \pub\inst\ht6060hdwr Ref#: 920415
Notice:
Follow the instructions provided with the 6" HangTime pole system through instruction #9 to install/
assemble vertical pole and main extension arm assembly. Use these instructions in place of instruction
#10 to install the 60" Backboard onto the 6" HangTime pole. Continue with instruction #11 provided
with the pole system to complete assembly.
Customer Service
(800) 247-7668
1. Use
the
5/8" X 13" Hex Bolt
(E),
Bottom Spacer Bushings
(H) and
5/8" Lock Nuts
(F) to attach the
60"
Backboard
(A) to
Extension Arm
(B). Tighten
5/8" Lock Nut
(F) then back off 1/4 turn to make sure
60"
Backboard
(A) pivots freely. See Figure 1.
2. Install
Top Spacer Bushings
(G) into both
Parallel Linkages
(C) with the larger diameter of
Top Spacer
Bushing
(G) to the inside between the
60" Backboard
(A) and
Parallel Linkages
(C). See Figure 1.
3. Use
the
5/8" X 11" Hex Bolt
(D) and
5/8" Lock Nut
(F) to attach
60" Backboard
(A) to the
Parallel
Linkages
(C) with
Top Spacer Bushings
(G) previously installed. Tighten
5/8" Lock Nut
(F) then back off
1/4 turn to make sure
60" Backboard
(A) pivots freely. See Figure 1.
