background image

♦ 

Inspect all contents prior to installation.  Report any missing parts to dealer immediately. 

 

♦ 

Read all instructions before proceeding. 

P A R T S   L I S T 

 

Item 

Qty 

Description 

Item 

Qty 

Description 

Extension Adaptor  

32 

Spring Pins 

10’ Uprights Extensions 

 

 

 

—— Instruction Manual —— 

B

ISON

 F

OOTBALL

 U

PRIGHT

 E

XTENSION

 

1 P

AIR

 O

F

 U

PRIGHT

 E

XTENSIONS

 

FB10EXT-SY, FB10EXT-WT 

Date:  2/26/2013     Rev:   2    B.A.               N.J.C.                 File:  //bisonserver/publisher/instruction/30’uprightextension       Ref#:800064 

Customer Service     

(800) 247-7668 

1. Place 

the 

10’ Upright Extensions

 (D) on a flat surface, insert 

Extension Adaptor 

(B) into one end 

 

making sure the flange is flush with the 

10’

 

upright

 

extensions

 (D). Position the other upright onto the 

 

exposed end of 

Extension Adapter

 (B). Clamp a straight edge along the uprights and the adapter, to 

 

insure straightness during the drilling process. See Figure 1 

 
 
2.  Drill through entire assembly with 1/4” drill bit approximately 1” down from the bottom of the flange. 
 

Drive one of the 

Spring Pins

 (C) into the hole flush with the outside of the upright. Rotate the assembly 

 

180 degrees and drive another 

Spring Pin 

(C) into the exit hole flush with the outside of the upright. 

 

Rotate the assembly 90 degrees and drill through the entire assembly once again approximately 3” 

 

from the bottom of the flange. Drive a 

Spring Pin 

(C) into the hole flush with the outside of the 

 

upright. Rotate the assembly 180 degrees and drive another 

Spring Pin 

(C) into the exit hole flush with 

 

the outside of the upright. Measuring from the top of the flange, repeat drilling process from above, and 

 install 

Spring Pins 

(C). See Figure 1. 

 
 
3.  Continue with instruction #8 in your Goal Post instruction to complete goal assembly. 

Caution! 

Before drilling the uprights, clamp a straight edge along the upright assembly to ensure the assembly remains 

straight. Any variance and/or out of alignment, will be magnified once rotated to their upright position. 

Notice! 

 

Make sure 10’ extension is at the top of the upright when installing into crossbar. 

Отзывы: