Bishamon ST30EWW, Руководство по эксплуатации и обслуживанию

Страница: 5 / 7

(4) Battery and Charging
■ How to Charge Battery
① Make sure that battery fluid is present upto the designated fluid level.
Add purified water if the fluid is insufficient.
② Unplug the battery socket and insert the charging device into the open
socket (indicating as "charging port") to charge the battery.
③ Refer to the instruction manual supplied with the charger regarding
methods of use.
■ Battery Life
① Battery is a consumable product and is not applicable
for the product warranty.
② Battery can be used for 150 to 180 charges, but
maintenance and storage conditions also strongly
influence the life of battery.
- 5 -
・
Keep battery away from open flame when charging.
Battery may be at risk of explosion.
・
Choose a well-ventilated area to charge the battery.
Hydrogen gas may be produced, creating the danger
of explosion.
・
Charging the battery with insufficient battery fluid
repeatedly also could result in the risk of explosion.
Cover the battery termial completely. Electrical short circuit can cause danger of fire, or
electric shock. DO NOT overcharge or boost the charger. Also DO NOT discharge the battery
100%.
Charging port
The charging port
must be connected
using a socket
with a seal
attached.
Do not connect sockets
without a seal attached.
Connection at this port
will not charge the
battery.
Lowering Valve
Switch Valve
Switch
Valve
Fuse 100A
Battery
Down Up
Motor Cable B
Black
Batery Socket
Fuse
Motor Cable A
Black
Black
Black
Red
Red
Battery
Battery Cable B
Battery Cable
C
Battery Cable A