18
9-3 Lifting up a vehicle and stopping the lift
1. Pull the control lever to the lift-up side and lift up the vehicle until the
support rubber pads come into contact with the lifting points. Then,
ensure that the positions of the adjustable supports are matched with
those of the lifting points. If not, readjust the positions of the adjustable
supports.
*When the lift is raised, the restraint devices will
automatically be engaged.
If the swing arms need to be swung around after the lift is
raised, pull the restraint device release lever to
disengage the restraint devices.
*Keep out from under the vehicle during lift operation.
*If the vehicle is falling from the lift, move away quickly. DO NOT attempt to support the
vehicle.
*DO NOT lift up a vehicle with any person or baggage inside.
*Pay constant attention to the area around the vehicle and the lift during lift-up. NEVER
look aside during operation.
Caution
Danger
The restraint devices do not support the load or impact of the vehicle.
(This device cannot prevent abnormal loads caused by offset loads or by supports in
improper contact. Pay close attention to the position of the vehicle or the engagement of
the supports.)
Caution
DO NOT lift a vehicle when any of the restraint devices is out of order.
The swing arms may move and dislodge the supports, causing the vehicle to fall.
Warning
“Lock”
“Disengage”
Unlocking operation
Restraint device release lever
Control lever
Stop
Lift-up
Lift-down
