background image

 

 

Vendor: S000238 

Page 

1

 of 

11

 

 

 

 

ASSEMBLY INSTRUCTIONS 

CORONA ENTERTAINMENT UNIT 

 

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR 
USE YOUR CORONA ENTERTAINMENT UNIT 

 

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE 

 

ASSEMBLY INSTRUCTIONS: 

Please check contents and read instructions carefully before commencing assembly 
To avoid damages assemble the item on a soft, clean surface 

 

HEALTH & SAFETY: 

DO NOT use this item if any parts are missing, damaged or worn 
DO NOT use this item unless all fixings are secured 
Always use on a level, even surface 
It is recommended that two people handle and assemble the item 

 

CARE & MAINTENANCE: To enjoy your furniture for many years please follow our recommendations 
below: 

This product is manufactured in pine which is a wood with natural characteristics including knots, grains, 
clusters or indentations 
On unpacking the item you may notice an odour due to the production process. However, this will disappear 
after a period of time. 
Do not place the item next to a radiator or direct sunlight – this item is manufactured in pine but is susceptible 
to temperature change. It is recommended an even room temperature be maintained with no sudden 
fluctuations. 
Do not place hot or cold items directly onto the surface of the item – always use a placemat or marking will 
occur 
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water, detergents, 
aerosol sprays or any polish. The use of these materials would invalidate any claims. 
You may wish to retreat the surface to maintain the original finish – this can be done using block wax (un-
perfumed). Please follow the manufacturer’s instructions carefully 
Do not place the item onto wet or damp flooring as staining may occur to the floor 
Periodically check all screws & fixings to ensure they are secure 
DO NOT push the item as this will damage the base 
Keep any sharp objects away from the item 

 

www.birlea.com 

 

Содержание corona












Отзывы: