WiFi Converter
09.288WN.04158
Wiring diagram
12V DC power input
Method 1:Connect your cell phone with your home net router(WiFi-RF)
Function introduction
Important:
Read All Instructions Prior to Installation
Output
RF signal
Operation Frequency
2.4G
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimensions
110x85x24.2mm
• The convertor works with RF receiver series to be controlled by IOS or Android system via WIFI.
• Waterproof grade: IP20
Product Data
•
DO NOT install with power applied to device.
•
DO NOT expose the device to moisture.
Safety & Warnings
Power Supply
12VDC
Green LED indicator:
Power normal
Red LED indicator:
Under control
Blue LED indicator:
WiFi connected
Ethernet
12V DC power
input
Router
Learning
Key
RF LED Receiver
Method 2:Connect your cell phone with the converter(WiFi -RF)
12V DC power
input
Learning
Key
RF LED Receiver
Learning
Key
RF LED Receiver
Reset
Switch
41 mm
WiFi Reset switch: press and
hold down for 10S then release,
the blue WiFi indicator will go
off and go on again, WiFi setting
will be factory reset.
Note
: When the hub
is configured to home router,
use the button to reset WiFi
setting to enable to control
directly through the hub
network again.
