BIRD SignalHawk SH-36S-RM-ASL Скачать руководство пользователя страница 150

Страница: 150 / 195

PC/Rack Mount SignalHawk with ASL

136

Menu Bar

File

Presents commands to Open, Close, Save, Export, and Print SignalHawk files that are stored on

the PC.

Note: By default, traces will be saved to the “My Traces”, which is a sub-folder under the folder

where the PCTool was installed.

Edit

Presents commands to copy the active trace from a graph and paste it into another graph.

Traces can also be deleted from a graph.

NOTE

The last trace remaining on a graph cannot be removed.

View

Presents commands to manipulate the trace - Zoom In, Zoom Out, Add, and Delete Markers or

Limit Lines, Autoscale the Trace, Set to Normal Mode, and Set Options. Normal mode is

identified by the standard Windows “selection” cursor (arrow pointing to the upper left). DTF

Settings (Cable Vp & Loss, Start & Stop Distance, etc) can also be viewed.

Tools

Presents access to the units converter.

Measurements

NOTE

This option not applicable to PC or Rack Mount SignalHawks.

Presents the various measurement types to display the reading. The types of measurement

depend on the type of trace file being read. VNA files will give Match Measurement, Distance-

to-Fault, Cable Loss, and Smith Chart as options.

Содержание SignalHawk SH-36S-RM-ASL




































































































































































































Результаты поиска

Содержание SignalHawk SH-36S-RM-ASL

Отзывы:

BIRD SignalHawk SH-36S-RM-ASL, Руководство по эксплуатации, Страница: 150 / 195

Результаты поиска

Содержание SignalHawk SH-36S-RM-ASL

Отзывы: