manualshive.com logo in svg

BIRD SignalHawk SH-36S-PC, Руководство по эксплуатации

Поделиться
Скачать
BIRD SignalHawk SH-36S-PC Скачать руководство пользователя страница 78

SignalHawk™ PC and Rack Mount Models

63

Utility Main Menu

Version Info

Click on this to view general information such as how to contact Bird 
Technologies Group.

The selections for this menu provide access to user help and the Windows 
operating system.

Utility Main Menu Selections

Spectrum Analyzer Help

Click on this selection to display the SignalHawk Start-up Instructions. Press the 
up- and down-arrow keys or use the mouse scroll wheel to scroll through the 
displayed text. Click on Exit Menu or Esc to return to the Utility Menu.

Custom Help

Displays user created help files that have been uploaded to the SignalHawk. 

Exit to Windows

Click on this to exit the SignalHawk program.

Customizing SignalHawk Content

1.

Go to the Utilities menu.

2.

Press the Exit to Windows soft key.

Note:

 

The SignalHawk will ask for verification.

3.

Go to My Computer on the PC.

4.

Click on the following:

a.

Hard Drive

b.

Program Files

c.

Bird Technologies Group

d.

PC SignalHawk

e.

My Lists

Содержание SignalHawk SH-36S-PC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды