RF Power Measurement
67
Open the Session List
1.
Tap the menu icon on the RF Meter device selection screen to display the
Preferences menu.
2.
Tap Session List on the menu.
Save a Custom Configuration as a Default Preset
Note:
Your custom setup can be saved as a Default Preset session file.
This allows the same custom setup to be viewed the first time you
connect to the same type of Bird Power Sensor.
1.
Connect to a Bird Power Sensor.
2.
Setup the User Interface to your preferred setup. The following are
examples of custom setup items:
a.
Save configurations for Graphs.
b.
Organize the readings menu.
c.
Configure the sensor.
d.
Setup logging criteria.
3.
Tap the menu overflow icon.
4.
Tap Session List.
5.
Press the session file for the device setup up above until the save menu is
displayed.
6.
Tap Save As.
7.
Select Default Preset then tap OK.
Note:
You must delete any previous session files so your Default Preset
will be used as the default Session File. This allows the same custom
setup to be viewed every time you connect to the same type of Bird
Power Sensor.
Edit Session File
Once a session file has been created, you can easily edit the session file even
when not connected to the sensor.
1.
Tap the menu overflow icon.
2.
Tap Session List.
3.
Press the session file until the menu is displayed.
4.
Tap Edit Session.
5.
Edit any settings just as if the sensor was connected, any changes will be
automatically saved in the selected session file.
