Channel Power Sensor 4042E
11
Figure 11 Alarm Display
PTT Settings
PTT is used to prevent spurious alarms during periods when the transmitter is
not transmitting because alarm functions for that channel will only be possible
when the transmit button is engaged.
PTT is controlled on the settings page, PTT may be set to normally open or
normally closed logic, or disabled, see
The PTT terminals on the 4042E must be connected to the transmitter in the
correct logic state for PTT to operate correctly.
Note:
Currently only one channel may use the PTT terminal on the
4042E.
Figure 12 PTT Options
Содержание 4042E
Страница 2: ......
