- Instructions continued on next page -
H007712
Rev. #0
Printed on recycled paper
BIRD IN HAND
Woodworks, Inc.
Lancaster, Pennsylvania
®
A member of the School Specialty Family
Product Guide - General Instructions and Information
ADULT ASSEMBLY REQUIRED
Model Number: 1526403
KD 10-Cubby Wall Locker
Warning:
This product is for children.
Supervision is required at all times.
Warning:
Manufacturer is not responsible for
modifications made to our products
by customers.
Cleaning:
Use a mild soap and water
solution. Be sure to wipe all
water from the wood surface.
Important:
Do not discard these instructions.
Keep for future reference.
Customer Service:
P.O. Box 1579
Appleton, WI 54912-1579
Phone: 1-888-388-3224
Fax: 1-888-388-6344
E-Mail: [email protected]
Website: www.schoolspecialty.com
STEP 1:
Attach parts as shown at left
using the 2" long screws and wrench
provided.
Top Panel
(#101077 - 1 Groove)
Long Top Hanger
(#103665)
Divider
(#101081 - 4 pcs.)
7MM Screws
(H000700 - 16 pcs.)
Bottom Panel
(#101079)
CRITICAL!:
Top Wall Hanger
showing proper position
of beveled edge
Inside of cabinet
Back Panel
Top Panel
Right Side
(#101078R)
Close-Up Detail Views of
Top Hanger Position
and Assembly
Dowel Pins
(#PD1025 - 4 pcs.)
WARNING!
The top wall hanger is
attached using dowel pins on each
end and must be positioned so that the
beveled edge is facing towards the
inside of the cabinet! Failure to do so
will prevent the cabinet from being
mounted securely, possibly causing
serious injury or death.
Allen Wrench
(#H007395)
