C:\Users\jpierce\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook\HJBJM9QN\EZ
Catch Remote.doc
Bird Barrier America, Inc.
20925 Chico Street
Carson, CA 90746
800-503-5444
www.birdbarrier.com
E-Z Catch with Remote Trap Trigger
Product Installation & Operation
1: Install 8 AA batteries (Fig 1 & 2).
2: Install Trap Trigger device on to the E-Z Catch frame with wing nuts provided (Fig 3 & 4)
4. Press Trap Trigger plunger into device to leave guide clear for setting rod.
5. Setting trap: swing setting rod away from trap and fold spring-loaded half of trap over. Pull
back net to keep clear of Trap Trigger device. Flip setting rod over folded half of trap and
place in setting rod guide (Fig 5). Net should form a V pattern when trap is set.
6. Extend Trap Trigger plunger over setting rod (Fig 6).
IMPORTANT NOTE: DO NOT extend
plunger all the way over to touch the setting rod guide. Extend plunger just enough to hold
setting rod in place, there must be space between plunger and setting rod guide or trap will
not fire
(Fig 6).
7. Place bait on pan.
8. Turn Trap Trigger device on with ON/OFF switch located on the side of the unit (Fig 7).
The LED will indicate if unit is on (green light lit) or off. Trap is now ready to fire.
9. Trap Trigger device is activated by Remote only.
10. Trap Trigger device has a 4 second hold time between each trip. Unit cannot be reset until
the 4 second hold time has expired.
WARNING: Keep head and body parts away from E-Z Catch when setting and once set as
trap may fire if not set correctly. Remove battery pack when unit is not in use for an
extended period of time.
Helpful Hints:
A.
Each Trap Trigger unit will have it own unique
M
aximum
E
ffective
R
ange. Typically the
M.E.R. is approximately 125’. Ranges of up to 200’ can be obtained. For extended
range remove Trap Trigger top (Fig 1) and extend antenna through small hole (Fig 7)
located on side of unit. Form antenna straight up.
B.
Battery life will diminish M.E.R.
C.
Use a grease lubricant on setting rod where it meets the plunger
D.
Place plunger over half of setting rod. Do not move plunger completely over rod.
E.
Two Trap Triggers cannot be activated simultaneously. They must be activated one at a
time.
F.
Turn off unit when not in use. There is a power drain on the batteries when the LED is
on.
G.
Each Trap Trigger will activate ONLY with the Remote that came with the unit. You can
not interchange Remotes.
H.
Replacement Remotes are available.
