manualshive.com logo in svg

BIOTRONIK Evia HF, Техническое руководство, Страница: 47 / 138

Поделиться
Скачать
BIOTRONIK Evia HF Скачать руководство пользователя страница 47

Chapter 5 

Programmable Parameters

Evia HF / HF-T Technical Manual 

PAGE 39

Lead polarity can be programmed separately for sensing and pacing in the atrium and ventricles.

Figure  23:  LV Pacing Options

The programmed lead polarity determines whether the pulse generator senses or paces in a unipolar 

or bipolar configuration. Lead polarity can be programmed separately for sensing and pacing in both 

chambers. 
If a bipolar lead is connected to the pulse generator, unipolar or bipolar configuration can be 

programmed for pacing and sensing. As compared to bipolar pacing, the unipolar pacing pulse has 

the advantage of being clearly identifiable on the ECG. Unipolar pacing occasionally results in muscle 

stimulation in the pulse generator pocket or diaphragm.
Bipolar sensing offers an improved “signal-to-noise” ratio due to the decreased susceptibility to 

interference signals like skeletal myopotentials or EMI, and, therefore, permits programming of higher 

sensitivities (lower values).

WARNING

Unipolar/Bipolar 

  All Evia CRT-P models can be used with either 

unipolar or bipolar IS-1 leads.

5.7   Parameters for Rate-Adaptive Pacing

The Evia CRT-P achieves rate adaption through programming of either standard motion-based pacing 

via a capacitive accelerometer or by the means of the principle of closed loop stimulation (CLS) which 

involves the translation of myocardial contractility into patient-specific pacing rates. 
For standard motion-based rate adaption, the pulse generator is equipped with an accelerometer 

located on the hybrid circuit of the pulse generator. This sensor produces an electric signal during 

physical activity of the patient. If a rate-adaptive mode is programmed, then the sensor signal controls 

Содержание Evia HF











































































































































Отзывы:

Нет отзывов