Biotek Synergy LX, Руководство пользователя, Страница: 80 / 198

Inspect/Clean Filter Cubes | 56
Touchscreen. Avoid strong solvents, such as alcohol, acetone,
ammonium chloride, methylene chloride, and hydrocarbons. These will
permanently damage the touchscreen. Avoid fibrous materials, such as
paper towels, which can scratch the touchscreen. Dirt particles and
cleaning agents will get trapped in the scratches. Never spray solutions
directly on the touchscreen.
Procedure
Important! Never spray solutions directly on the touchscreen.
1. Turn off and unplug the instrument.
2. Moisten a clean, lint-free disposable cloth with water or with water and mild detergent,
then thoroughly wring it out so that liquid does not drip from it. Do not soak the cloth.
3. Wipe the touchscreen gently with the moist cloth.
4. If detergent was used, wipe the touchscreen with a cloth moistened with water.
5. Dry the screen gently using another cloth.
Inspect/Clean Filter Cubes
For models with fluorescence/luminescence capability only.
Filters should be inspected and cleaned at least every three months. You’ll need:
l
Isopropyl, ethyl, or methyl alcohol
l
Lens-cleaning tissue
l
Cloth gloves
l
Magnifying glass
Do not touch the filters with your bare fingers!
1. Open the top access door on the instrument’s front panel, and slide the filter cube out
of its port.
2. Inspect the glass filters for speckled surfaces or a “halo” effect. This may indicate
deterioration due to moisture exposure over a long period of time.
Synergy LX User Manual
1501000N Revision A BioTek Instruments, Inc.