Preface
Page 8 of 42
Epoch 2
Instructions for Use
1771011
Revision
A
BioTek Instruments, Inc.
CE
Mark
Directive 2014/30/
EU
: Electromagnetic Compatibility
Emissions
—
Class A
The system has been type-tested by an independent, accredited testing laboratory and
found to meet the requirements of
EN
61326-1: Class A for Radiated Emissions and
Line Conducted Emissions.
Verification of compliance was conducted to the limits and methods of
EN
55011
–
(
CISPR
11) Class A. In a domestic environment it may cause radio interference, in which
case you may need to mitigate the interference.
Immunity
The system has been type-tested by an independent, accredited testing laboratory and
found to meet the requirements of
EN
61326-1 and
EN
61326-2-6 for Immunity.
Verification of compliance was conducted to the limits and methods of the following:
EN
61000-4-2, Electrostatic Discharge
EN
61000-4-3, Radiated Radio Frequency (RF) Immunity
EN
61000-4-4, Electrical Fast Transient/Burst Immunity
EN
61000-4-5, Surge Immunity
EN
61000-4-6, Conducted RF Disturbance Immunity
EN
61000-4-11, Voltage Dips, Interruptions and Short Variations
Directive 2014/35/
EU
Low Voltage (Safety)
The system has been type-tested by an independent testing laboratory and was found
to meet the requirements of this Directive. Verification of compliance was conducted
to the limits and methods of the following:
EN
61010-1. "Safety requirement for electrical equipment for measurement, control
and laboratory use. Part 1, General requirements."
EN
61010-2-010. "Particular requirements for laboratory equipment for the heating of
materials."
Directive 2012/19/
EU
: Waste Electrical and Electronic Equipment
Disposal Notice:
Dispose of the instrument according to Directive 2012/19/
EU
, “on
waste electrical and electronic equipment (
WEEE
)” or local ordinances.