background image

M

M

M

7

7

7

V

V

V

I

I

I

Z

Z

Z

4

4

4

0

0

0

0

0

0

 

 

 

 
FCC Information and Copyright 
 

This equipment has been tested and found to comply with the limits of a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications. There is no guarantee that interference will not occur in 

a particular installation. 

 
The vendor makes no representations or warranties with respect to the 

contents here of and specially disclaims any implied warranties of 

merchantability or fitness for any purpose. Further the vendor reserves 

the right to revise this publication and to make changes to the contents 

here of without obligation to notify any party beforehand. 

Duplication of this publication, in part or in whole, is not allowed without 

first obtaining the vendor’s approval in writing. 
 

The content of this user’s manual is subject to be changed without notice 

and we will not be responsible for any mistakes found in this user’s 

manual. All the brand and product names are trademarks of their 

respective companies.   

 

     

i

Содержание M7IZ400




























Отзывы: