Accelerometer (ACC)
User Manual
13 of 16
!
The user should not immerse the sensors or the
biosignalsplux
device, nor clean with liquid or
abrasives.
!
The user should handle the
biosignalsplux
device with caution and not expose the device or
accessories to high accelerations and vibrations.
!
biosignalsplux
devices should not be used in patients with implanted electronic devices of any
kind, including pace-makers, electronic infusion pumps, stimulators, defibrillators or similar.
!
Do not apply electrodes over damaged or irritated skin.
!
Do not use your device while charging its internal battery.
5.2.
Transportation and Storage
Please follow these recommendations to ensure safe transportation and storage of your
biosignalsplux
equipment and sensors to prevent any damaging of your system.
The
biosignalsplux
equipment and sensors should be stored in the original box in a dry place when
those are not being used.
•
Relative humidity: up to 95% with no condensation
•
Ambient temperature: 10°C to 30°C
•
Atmospheric pressure between 500hPa and 1060hPa
Whenever the equipment needs to be transported, it should be placed in the original box, since this
was designed and tested to ensure the equipment and accessories are securely stored.
Take care while handling the transportation of the system and avoid dropping it, since the device is
not shock-proof and should not be placed under stress or sudden acceleration.
5.3.
Cleaning
Please follow these cleaning instructions to prevent any damage of the system or the user because of
conducting cleaning methods that may cause any damage.
•
The
biosignalsplux
and sensors should be visually checked before each use and cleaning
process to ensure that no mechanical damage occurred.
•
The
biosignalsplux
equipment and sensors (including the cables) should be cleaned with a
slightly damp cloth or suitable absorbent paper, ensuring no liquid enters the equipment of
sensors. Do not use detergent or any type of cleaning liquid as these may damage your
equipment and/or sensor.
•
Do not clean or re-use detection surfaces (electrodes). They are only suitable for single use
and should be disposed of after usage except indicated otherwise.
