Biosan BioMagPure 12 Plus Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 22

Biosan BioMagPure 12 Plus Скачать руководство пользователя страница 4

Page 4

V1.6.3

1.

Introduction

Thank you for purchase of the BioMagPure 12 Plus system

,

which is a fully automated,

standalone robot that can purify nucleic acids within 30-45 minutes. With advanced magnetic bead

separation technology, it enables you to have high quality extraction results. Moreover, the most user-

friendly interface makes users free from troublesome parameter settings and maintenance.

This guide contains important information regarding the safe use of the BioMagPure 12 Plus

system. Please read this manual carefully before you start to run the system at the first time, especially

for Safety Information.

If there is any question about how to install or operate it, please contact our certified distributors

/ agents or email to our technical support centre ( [email protected] ).

Manufacturer Info:

Biosan SIA

Ratsupites 7, build.2, Riga, LV-1067, Latvia

Phone: +371 67426137 Fax: +371 67428101

http://www.biosan.lv

BioMagPure Magnetic Bead Purification Process

«
...
2
3
4
5
6
...
»

Содержание BioMagPure 12 Plus























Отзывы:

Нет отзывов