bioslighting.com
(321) 260-2467
Page 1 of 2
Rev1 [2021 01/05]
Specifications and dimensions subject to change without notice.
Contact BIOS for questions and the most current information.
ICES-005 (A)
Installation Guide
Icarus
™
Li2
HIGH OUTPUT
INSTALL IN SECONDS
ENERGY EFFICIENT
1. Loosen RapidRack
™
thumb screw enough to slide RapidRack
™
plate.
2. Slide RapidRack
™
plate into desired rack mount position.
3. Tighten RapidRack
™
thumb screw to secure RapidRack
™
plate into place.
RapidRack™ Mounting Plate
RapidRack™ Thumb Screw
Extend & rest on ledge
Extend & secure
1. Extend RapidRack™ plates on one end and rest on rack
ledge.
2. Extend RapidRack™ on opposite side to complete
secure mounting solution.
Tip:
For more info, documents and videos reqarding your BIOS Icarus LLi fixtures: Please log onto www.bioslighting.com/product/icarus-lli/
1.
Simply slide joiner plate into each side of the fixture.
2. Use thumb screws to screw joiner plate into place.
Li 2 Joiner Plate
1. Utilize brackets to mount power supply and cables.
2. Snap brackets into place on the middle two bars.
3. Screw power supply into brackets.
Brackets for cables and PSU box
Screw joiner plate into place
For PSU wiring info, please visit product page by scanning QR code.
IMPORTANT:
To avoid risk of damage to the fixture and their LEDs, make all wiring
Easy Rack Mount Solution with RapidRack
™
BP-0Li2-000-KTL013-x & BP-0Li2-000-KTH013-X
Read all instructions prior to performing installation. All facility wiring to be performed only by licensed electricians in accordance with National Electric Code
and local code specifications. Failure to do so voids warranty and may result in serious injury or death. Supplied Connectors on all power cables have breaking
capacity and can be installed by non-licensed individuals. Disconnect main power prior to installation, maintenance or service.
ELECTRICAL SHOCK HAZARD
CAUTION!
Joining Your Li2 Fixture
On-Board Power Supply
