Bioprom MPT-AIR BIO PID, Руководство по эксплуатации

Страница: 11 / 40

11
By turning an encoder you select the needed parameter of Hot Water Supply
(the selected element is outlined by red rectangle). To change it you shall press fast on
the encoder, figures will change their color to red – you may change the parameter. By
turning an encoder you set the needed parameter value. By pressing the encoder for the
second time you confirm the parameter change, figures will again change color to black.
Once all the parameters are set up, you go back to the main menu by selecting icon ,
by means of the encoder and press encoder button.
2.5 Work Priority Selection
To select the operation mode you shall go to the main menu and select icon, ,
«Operation mode»(Picture 8).
Picture 8 – Main Menu (operation mode selection)
Operation mode selection menu will open if you press fast a dial (Picture 9).
Picture 9 – Boiler Operation Mode Menu