Bionet BM3Vet Pro, Руководство по эксплуатации

Страница: 32 / 206

32
BM3Vet Pro User’s Manual
Getting Started
Starting the monitor: Press the power key (O) at the bottom right of the monitor front panel. The
power light on the monitor lights up, the alarm bar lights up, the screen lights up, and the main
screen is displayed after running the self-test.
Stopping the monitor: Press and hold the power key (O) for 3 seconds. The screen goes off after
saving data.
Main screen setup
After the monitor is turned on, the main screen is displayed.
From the keys on the right side of the monitor's front screen, press the Home screen key. The
main screen is displayed, as shown in the following figure.
1 Status Message
2 Waveform Window
3 Numeric Window
4 Menu Window
1
2
3
4