1
ASSEMBLY INSTRUCTIONS FOR THE AMS BIKE
Assembly manual overview:
1. Removing the bicycle from packaging
2.
3.
Mounting the handlebar
4.
Mounting the front wheel
5.
Adjustment of the front disc brake
6.
Mounting the pedals
7.
8.
Mounting the seat post/saddle
9.
Mounting rear fender and reflector
10.
Mounting front fender and reflector
Check list before releasing the bicycle to end-user
Contact
Tools included:
4mm Allen key, 5 mm Allen key, 6 mm Allen key, 15mm wrench/pedal wrench.
1. Removing the bicycle from packaging
When removing the bicycle from the box, be careful that no items are scratching the frame. Be
careful to remove the handlebar together with the bicycle, as it is attached to the bicycle by
the brake wire.
Remove all carton and paper covering the frame and the parts.
Remove the front wheel from the box
Remove the small box containing the pedals and manuals and other items.
All of these instructions must be followed carefully before using the bicycle.
2. Mounting the Handle Bar
Tools needed: 5 mm Allen Key
Place handlebar in the top tube of the frame
and tighten up.
Make sure the position of the handlebar is
correct and that the bolt is tightend safely.
TM
