BioLife Stirling Ultracold ULT25NEU, Руководство по эксплуатации, Страница: 23 / 34

ULT25NEU-LIT-OM-E
|
stirlingultracold.com
|
23 OF 34 TABLE OF CONTENTS
CALIBRATING THE RTD WITH AN INDEPENDENT TEMPERATURE INDICATOR
The ULT25NEU’s Resistance Temperature Device (RTD) is factory calibrated
to display both setpoint and operating temperature from a single internal
RTD. In the event that you must recalibrate the unit to match the reading
of an independent temperature recording device or stand-alone electronic
thermometer, please follow this process.
1 Tools Required
Flashlight or work light
Long handled (6-7”), Phillip’s or flathead screwdriver
Independent Thermocouple and a NIST traceable temperature
measuring device with sufficient lead wire to pass through the
1/8" access port and affix to the vertical liner channel
Tape.
8. CALIBRATION GUIDE