biodex ATOMLAB 500 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 212

biodex ATOMLAB 500 Скачать руководство пользователя страница 94

Accuracy Test History

The Accuracy Data screen displays the Accuracy Tests performed on the dose calibrator. The
data is stored for the detector connected to the system. The display shows all the isotopes for
which Accuracy Tests have been completed by the date performed. Any Accuracy Test outside
the acceptable variance is shown in red.

•

Touch <Back> to return to the QA Dose Calibrator screen.

•

Touch <Print> to print a listing of the Accuracy Test data.

•

Use the <

▲

> and <

▼

> arrows to scroll through the Accuracy Test data list to locate

the test date desired.

Figure 6.36. The Accuracy Test History Screen.

The Accuracy Data screen displays the Accuracy Tests performed on the dose calibrator. The
data is stored for the detector connected to the system. The display shows all the isotopes for
which Accuracy Tests have been completed by the date performed. Any Accuracy Test outside
the acceptable variance is shown in red.

•

Touch <Back> to return to the QA Dose Calibrator screen.

•

Touch <Print> to print the Accuracy Test data.

•

Use the <

▲

> and <

▼

> arrows to scroll through the Accuracy Test data list to locate

the test date desired.

To Delete Data:

1.

Use the <

▲

> and <

▼

> arrows to scroll to the test to delete.

2.

Touch <Delete>. The Delete Stored Test Data screen is displayed.

«
...
92
93
94
95
96
...
»

Содержание ATOMLAB 500





















































































































































































































Отзывы:

Нет отзывов