biodex ATOMLAB 500 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 212

biodex ATOMLAB 500 Скачать руководство пользователя страница 58

Label Printing Preferences

Figure 4.62. The Label Printing Preferences Screen

The Label Printing Preferences screen allows users to set the number of copies of the large
label and small labels that will be printed. The standard small strip label (2 up) has two labels
on each printout. These labels feature the radiation warning symbol and the word caution
printed in the left corner. The 2 up label can be replaced with a 1 up label (not supplied by
Biodex).

The small strip label can be used to label syringes, syringe shields, etc. Both the large and small
label styles print different information depending on the record from which the print function is
selected. Labels can be printed from the following records:

•

Measure Activity Record.

•

Dose Calculation.

•

Future Dose Record.

Sample labels are presented throughout this manual with the specific function instructions.

The number of labels can be set from zero (to print no label) to as many as six copies. Touch
<Print Labels> once from the specific function selected to generate all the labels.

To Set Label Printing Preferences:

1.

At the Dose Calibrator Configuration screen, touch <Label Printing Preferences>. The Label
Printing Preferences screen is displayed (see Figure 4.63).

2.

Touch to highlight any record field and use the <

▲

> and <

▼

> arrows to increase or

decrease the number of copies to print for the highlighted record.

3.

Touch <Accept> to record all settings and return to the Dose Calibrator Configuration
screen or <Cancel>.

If a change was made to any of the Label Printing Preferences and <Cancel> is touched,
the system will display the following screen:

«
...
56
57
58
59
60
...
»

Содержание ATOMLAB 500





















































































































































































































Отзывы:

Нет отзывов