biodex ATOMLAB 500 Скачать руководство пользователя страница 34

Страница: 34 / 212

•

Select Printer

– Touch the down arrow to display a list of available printers. Select the

desired printer by touching the name.

•

Copies

– Select the number of copies to print by using the <

▲

> and <

▼

> arrows to

change the number of copies displayed.

•

Zoom

– Increase or decrease the size of the displayed report by touching the <+> or <->

icon.

•

Export to PDF

– Touch the Export PDF icon < > to convert the report to a PDF format.

•

Advanced

– Touch the Advanced icon < > to configure the information to be printed

using screens similar to those within Windows:

Figure 4.11. Advanced Print Setup Screen

When all of the print functions have been selected, touch the Print icon <

> to print the

report.

Touch <Back> to return to the System Configuration screen without printing the Staff
report.

Regional Date and Time Settings

Figure 4.12. Regional Date and Time Settings Screen

This option allows the user to enter or change the system clock and calendar, select the

Содержание ATOMLAB 500





















































































































































































































Результаты поиска

Содержание ATOMLAB 500

Отзывы:

biodex ATOMLAB 500, Руководство по эксплуатации и обслуживанию, Страница: 34 / 212

Результаты поиска

Содержание ATOMLAB 500

Отзывы: