biodex ATOMLAB 500, Руководство по эксплуатации и обслуживанию, Страница: 23 / 212

1. Rotate the detector unit to access the connector on the base of the detector.
2. Insert one end of the RJ12 detector cable into the mating detector port.
3. Rotate the detector unit to its normal position ensuring the detector jack is facing away
from the work area.
4. Rotate the display unit to access the connection ports located on the display back
panel.
5. Insert the free end of the detector cable into the mating display port (there are two RJ-
12 ports on the detector).
6. To connect a computer to the Atomlab 500, attach a null modem RS-232 Cable (or
USB/RS-232 converter cable) with a DB9 connector to the computer serial port and
attach the opposite end of the cable to the appropriate port on the display.
7. Insert the round end of the power supply or power pack into the power port on the
display unit.
8. Insert the female end of the power cord into the black, rectangular power pack. Turn
the display ON once the cord is plugged into the wall. The system will power-up and
run a self-test.
NOTE: As long as the Atomlab 500 is plugged in and power turned ON, the system will be
functioning. Depending on the Backlight Time setting, the display screen will eventually turn
OFF. Simply touch the screen to reactivate.
NOTE: If more than two USB ports are needed, a USB expansion hub (not included) can be
used to provide additional USB ports.
NOTE: The display can sit on the countertop or be mounted on the wall. Use the holes in the
base to mount to the wall.
Power Up and System Test
Figure 2.1. Power Up Screen