biodex ATOMLAB 500, Руководство по эксплуатации и обслуживанию, Страница: 193 / 212

WideWindow, Cs-137, 40 DPM, 20000 DPM, Ok, 35.24, 25-800 keV
Where:
Cs-137 = the isotope name assigned for the wide window.
40 DPM = the wide window net count in DPM.
14.0 = the wide window net count in CPM.
1039 DPM = Background CPM for the wide window.
20000 DPM = the trigger level for the wide window.
Ok = the status of the wide window (Ok or Over)
35.24 = the total efficiency of the wide window.
25-800 keV = the ROI of the wide window.
REQRECCNT
The command is used to request a count of stored QA test results by filtering on the type and
date range. It can be used to determine how many records will be returned with the given filters
for a REQDATA command to follow.
Filtering parameters are as follows:
1. QA Type:
•
All
•
CON Daily and Expanded Constancy
•
GEO Geometry
•
ACC Accuracy
•
DEC Decay
•
LIN Lineator
•
CAL Calicheck
•
HVA (Wipe) High Voltage Adjustment
•
CLB (Wipe) Daily Calibration
•
BCK (Wipe) Background
•
WIP Wipe Tests
•
CHI Chi-Square
2. Location Type: If the QA type is WIP, location type can be All or AREA (Restricted or
Unrestricted), SRC (Sealed Source) or PKG (Package).
3. Date Range: From-To for a date range or a date for a single day. A date is in the format of
mm/dd/yy or it can be mm/dd assuming the current year.
RESET
Immediately re-starts the Atomlab firmware program.