biodex 950-400, Инструкция по эксплуатации, Страница: 23 / 120

GAIT TRAINER 3 (v3.X SOFTWARE) 23
●
Set Step Length Tolerance Range : Touch <Set Range> and use the pop-up keypad to
increase or decrease the distance between the target lines the patient must achieve in
the steps they take.
●
Set Visual Biofeedback ON/OFF Interval Time : Touch <ON>, <OFF>, or <Interval> and
enter the desired feedback time intervals via the pop-up keyboard.
●
Set Audio Biofeedback ON/OFF Interval Time : Touch <ON>, <OFF>, or <Interval> and
enter the desired feedback time via the pop-up keyboard. The audio tone is not a
metronome tempo. The audio tone is timed to be in sync with the appearance of the
target box. Tone is also based on the last footfall. A tone can be heard without a
footfall. After a while, due to the rhythmic nature of walking, the tone falls into a
seemingly real-time tempo.
Once the desired parameters have been set/entered on the A/V screen, touch <OK> to return to
the Patient Setup screen.
The Select Patient Screen
Figure 2.7. The Select/Edit Patient screen.
In previous versions of the Gait Trainer software, a patient with existing data on the device
could only be re-tested by either: a) typing in the patient’s name exactly as it is spelled on an
existing record, or b) finding the patient within the set of records in the Patient Management
section of system Utilities. Now, with the Select Patient option, users can quickly find an
existing patient and started on a new gait training session.
There are two ways to identify specific existing patients from this screen. At the top there are
search options for a patient’s last name or an identification number that has been assigned to
the patient. Select one of these fields and enter either a patient last name or the ID number.
Select <OK> to display a listing of search results. To return to the list of all patients, select the
circular refresh arrow icon at the top right of the screen: