biodex 950-146, Руководство по установке и эксплуатации, Страница: 8 / 36

4.
The display turns on (powering up) when the user starts to turn the arm cranks. There
is no ON or OFF switch. Power up is the same if the power supply is plugged or not.
Time is displayed initially after anything has been set.
The user can stop exercising after the initial motion to set the effort level, time and
weight if desired.
The upper buttons are used to set the effort level, time and weight (if desired of the user )
SET EFFORT LEVEL - The resistance for the UBC is set to Isokinetic. The settings range
from 50 to 120 rpms in 5 rpm increments.
SET TIME - When the display first turns on, 0.0 time is displayed in the upper window. If
time is not set, it will count down from 10 minutes. If time is set, it will count up.
To set time, Press the SET TIME button, then adjust the +/- buttons to the desired Time setting.
Time can be reset any time. While exercising, the user can hit the Time button and the
time display will freeze at the present displayed time. If the user then presses the +
button, the time will increment up to the next whole minute, then continue to increment
the same way. If the user presses the - button, the time will increment down to the next
whole minute, then continue to increment the same way. Ether way, after the + or -
button hit, the time will start to count down from the new set time after 2 seconds.
SET WEIGHT - When the display first turns on, 0.0 time is displayed in the upper window.
Often the user will stop pedaling to set things, or they will keep pedaling and time will
start to count up. If the weight button is changed, the default is 150 lbs (68 kg). The
weight will be used to calculate Calories and METS.
If the display is set to Euro (metric) the weight will be converted to Kilograms.
For all circumstances, when the + / - buttons are held down, the weight will increment up to
500 lbs. (227 kg). The weight can be reset at any time during use similar to time.. After
the new weight is set, the new weight is used to calculate the calories and METS from that
time forward. Earlier calories calculated do not change if the weight is changed after
starting.
The lower readout is to display TOTAL CYCLES, HEART RATE, TOTAL WORK (x 100), METS,
CALORIES, RPM, and WATTS. These items are displayed one by one automatically. The
Start / Pause button is used to interrupt the automatic display so that a specific item may
remain displayed. Press the Start/Pause button to resume automatic display of each item.
If the user stops exercising after moving enough to light the display, the display remains
lit for two minutes before going out if no buttons are pressed. If any button is pressed,
the time out count down starts over. This is the same if the power supply is plugged in
or not.
OPERATION AND DISPLAY SETTINGS — 8 —